[ Home ] [ Jedco Custom-Made Belts ] [ Jedco Custom Cell Phone & Plier Cases ] [ Jedco Custom Knife Sheaths and Cowboy Knives ] [ Jedco Custom Wallets and Billfolds ] [ Fast Ship Wallets ] [ Order Here ] [ Jedco Custom Gun Holsters ]
Jedco Custom Gun Holsters

JEDCO CUSTOM GUN HOLSTERS:
We make custom Gun Holsters as listed below for the following handguns – COLT M-1911, MARK - 23, GLOCK - 17, GLOCK - 19, RUGER – LCP, SIG – P250, WALTHER – P99, WALTHER – PPK, S. & W. J-Frame 2”. **(We can make custom holsters for ANY gun IF you have your own BLUE GUN. Just send it with your order and we will build your new holster on your Blue Gun replica and return it. You can purchase BLUE GUNS from any law enforcement web site supply dealer and IF YOU BUY TWO HOLSTERS we will deduct the cost of your Blue-Gun (up to 40.00) from the order and keep it for other customers if you want to trade.)

---

ART WORK: (All standard 1” Block Lettering wanted will cost $3.00 per letter. We Tool in and Dye all lettering to make it stand out.  All Hand-Carved LARGE Lettering over 1” cost starts at $5.00 per letter and goes up. Prices for all other ART-WORK such as various Animals and Ranch Brands vary depending on the difficulty and price Starts at $30.00 and goes up, so ask for a price quote.)

---

KNIFE SHEATHS: We make all types of Custom Knife Sheaths, both Folder and Fixed-Blade to carry on your belt at any angle.  Please check our Custom Knife Sheath and Knife page listed at the top of this page.

---

GUN HOLSTERS:  All Holsters are Custom Hand-Made one at a time in our shops here at Hedley, Texas from Natural Cowhide Shoulder Tooling Leather. Sewn or Hand Leather laced edge, hand wet-molded and hand finished. Our Standard Gun Holsters are listed by Stock# and style category below. Currently we have Blue-Gun replicas for the handguns listed at the top of this page. Several different handguns will fit the same holster as those we list. On the back of the order form lay your gun flat and draw around it showing us the ANGLE you want the holster to hang. Colors available = Black, Brown, Tan, Natural-Oil.

(**Also, see our Custom Belt page where we offer many styles of Plain, Tooled and Hand-Carved belts to match our Gun Holsters and Knife Sheaths.)

---

(#JH-100)  CLASSIC  STYLE HOLSTER:
Worn Outside the Belt. One Piece wraparound or fold-over construction with leather reinforcement strip to keep holster mouth open.  Hand Wet-Molded for weapon retention, with Rear Belt Loop plus off-side stabilizing Belt Slot. OPTIONS: = Lined or Un-Lined, Open Top or Thumb Snap-Flap, With or Without Sweat-Pad, Right or Left side Hang/Carry,  Belt Slots 1-1/4” or 1-1/2”, Sewn or Laced Edge, Colors listed above and Tooling choices listed below.  Draw around your gun on order back showing the ANGLE wanted.

(a.) PLAIN (no tooling) = $75.00

(b.) TOOLED, choice PEBBLE or BASKET = $95.00

(c.) HAND-CARVED, Floral or Acorn/Oak = $115.00

---

(#JH-200) PANCAKE STYLE HOLSTER: 
Can be worn either Outside or Inside the Belt. Two-Piece construction with Belt Slots on each side of the weapon. Hand molded and hand finished. OPTIONS: = Lined or Un-Lined, Open Top or Thumb Snap-Flap, With or Without Sweat-Pad, Right or Left side Hang/Carry, Belt slots 1-1/4” or 1-1/2”, Sewn or Laced Edge, Colors listed above and tooling choices listed below. Draw around gun on order back showing ANGLE wanted.

(a.) PLAIN (no tooling) = $75.00

(b.) TOOLED, choice PEBBLE or BASKET = $95.00

(c.) HAND-CARVED, Floral or Acorn/Oak = $115.00

---

(#JH-300)  OLD REVOLVER STYLE HOLSTER:
Worn on your Jeans Belt or separate Holster Belt. This older style holster is for those customers with older or large revolvers wanting more of a western look. One piece Fold-Over construction with wide Belt Loop on back, and fold-down snap-strap for weapon retention. OPTIONS: = Lined or Un-Lined, Right or Left side Hang/Carry, Belt Loop for 1-1/2” or 1-3/4”, Sewn or Laced Edge, Colors listed above and tooling choices listed below. Make sure you draw around pistol on order blank back showing ANGLE hang you want.

(a.) PLAIN (no tooling) = $100.00

(b.) TOOLED, choice PEBBLE or BASKET = $130.00

(c.) HAND-CARVED, Floral or Acorn/Oak = $160.00

---

Belt-clip style Front view	Belt-clip style Back view		"Clip-Pocket"
Front		Back
Clip-Holster for a Walther-PPK automatic

(#JH-400) BELT-CLIP HOLSTER:
Can be worn either Inside Waistband or just under the belt. Made primarily for small flat automatics, small revolvers, or small derringers.  One piece Fold-Over with reinforcement strip construction from lighter weight leather for comfort. Steel Belt-Clip attachment for Belt/Waistband carry. OPTIONS: = Lined or Un-Lined, Open Top or Thumb Strap, With or Without Sweat-Pad, Right or Left side Hang/Carry, Sewn or Laced Edge, Colors listed above and tooling choices listed below. Make sure you draw around pistol on order blank back showing ANGLE hang you want.

(a.) PLAIN only and SEWN only. (no tooling) = 60.00
(b.)  TOOLED, choice PEBBLE or BASKET = $80.00
(c.)  HAND-CARVED, Floral or Acorn/Oak = $100.00
(d.)  CLIP-POCKET (Plain only) Worn inside waistband. = $40.00

---

Ankle-Holster
Showing ankle strap	Closed as worn on ankle.

(#JH-500) ANKLE-WRAP HOLSTER:
Primarily for small flat automatics or small revolvers. One piece fold over holster with thumb snap for retention. Holster is double sewn to the ankle-wrap piece. The ankle-wrap is adjustable with heavy duty Velcro strips, and lined with ¼” Felt for comfort. OPTIONS: = Lined or Un-Lined, Right or Left side Hang/Carry. Plain only. Color list at page top. Make sure you draw around pistol on order blank back and show ANGLE you want.
 

(a.)  PLAIN (no tooling) = $60.00

---